How to use

  • By Hand

    1. Make sure shake very well.
    2. Apply a small amount of MetalPolish to a microfiber. towel or wire wool depending on the metal type.
    3. Using firm pressure, work MetalPolish into the metal surface until the product becomes less opaque.
    4. Use a clean microfiber towel to buff away any additional residue.
    5. Repeat steps 1-3 if necessary.

  • By Machine

    1. Make sure shake very well.
    2. Apply 6-8 drops of MetalPolish to a firm foam polishing pad.
    3. Spread MetalPolish on the surface at speed 1-2.
    4. Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved.
    5. Using a clean microfiber towel, remove excess residue.
    6. Repeat steps 1-3 as necessary.
1 2