Products

How to use

  • By Hand

    1. Apply a small amount of MetalPolish to a microfiber towel or wire wool depending on the metal type and goal.
    2. Using firm pressure, work MetalPolish into the metal surface until the product becomes less opaque.
    3. Use a clean microfiber towel to buff away any additional residue.
    4. Repeat steps 1-3 if necessary.

  • By Machine

    1. Apply 6-8 drops of MetalPolish to a firm foam polishing pad.
    2. Spread MetalPolish on the surface at speed 1-2.
    3. Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved.
    4. Using a clean microfiber towel, remove excess residue.
    5. Repeat steps 1-3 as necessary.
1 2